Introduction:
Focus on the most basic of PCB, components focused on one side, the other side of the wire is concentrated.Because wires only appear on one side, so this kind of PCB is called single sided PCB.
Single panel wiring diagram is given priority to with the network printing, that is, in the copper surface printed on resistance agent, to prevent welding resistance after etching printed on mark, and then punching processing way to complete the parts guide hole and the appearance.In addition, part of a small amount of diverse products, are using photosensitive resistance agent forming pattern of the photographic method.
Operating temperatures range from 130 C to 230 C. Single sided boards are available with surface finishes including Organic surface protectant (OSP), Immersion Silver, Tin, and Gold plating along with both leaded or lead-free Hot Air Solder Level (HASL).
Material:
Single sided PCB base material in paper phenolic copper paper laminated board, epoxy resin copper laminated plate is given priority to.
Structure:
First, the copper foil to be etched, etc. Process to obtain a circuit required, a protective film to be drilled to expose the corresponding pad. After cleaning and then rolling method to combine the two. Then the pad portion exposed gold plating or tin protection.
Production Process:
Single copper-clad plate - blanking - photochemical method/screen printing image transfer - remove corrosion was printed - cleaning, dry - hole machining - shape - dry cleaning - printing resistance welding coating - cure - printing mark symbol - cure - dry cleaning drying - pre coated flux - a finished product
Application
Single sided PCB most use in the radio, heating machine, cold storage, washing machines and other electrical appliances product, as well as the printer, vending machines, LED lighting, electronic components, such as commercial machine circuit
Product Details:
Payment & Shipping Terms:
|
Gold-plated:: | Fu" , 1u" , 3u" , 6u" , 15u" , 30u" , 50u" | Application: | PCB |
---|---|---|---|
Patented NO: | 201520126620.x | Main Products: | Magjack , RJ45 Jack , RJ45 Connector , RJ45 , Rj45 Socket |
Project Application: | Networking Solutions | OEM/ODM: | OEM Service Offered Design Service Offered Buyer Label Offered |
Color: | Black, Yellow, Bule Option | Type: | SMD Connector |
High Light: | Rj45 Data Jack,Telephone Modular Jack |
RJ45 Female Connector 4P4C + 6P6C Double Port SMT Modular Jack and Full Plastic
Spectifications
Series |
SMD RJ11 Female Jack |
Connector Type |
RJ11 Female Connector |
Mounting Type |
Thru-Hole |
Orientation |
Top Enter |
Termination |
Solder |
LED Color |
Without |
Shielding |
No Shield |
NOTES:
ELECTRICAL:
1. VOLTAGE RATING:125 VAC RMS.
2. CURRENT RATING:1.5 AMP.
3. CONTACT RESISTANCE:50 milliohms max.
4. INSULATION RESISTANCE:500 megohms min @ 500V DC.
5. DIELECTRIC WITHSTANDING
RESISTANCE:1000V AC RMS 50Hz. 1min.
MECHNICAL:
1. HOUSING MATERIAL:glass filled polyester(UL94V-0).
2. CONTACT MATERIAL:phosphor bronze T=0.46mm (C5 100).
3. PLATING:glod plating over nickel.
4. DURRABILITY:750 cycles min.
5. PCB RETENTION PRE-SOLDER:1 LB min.
6. PCB RETENTION POST-SOLDER:10 LB min.
ENVIRONMENTAL:
1. STORAGE:-40℃ TO +85℃.
2. OPERATION:0℃ TO 70℃
3. WAVE SOLDER TEMPERTURE:230-250℃(5-10 seconds)
MATES WITH MODULAR PLUG CONFORMING TO FCC PART F.
Drawing
4P4C + 6P6C Double Port SMT RJ11 Jack , RJ11 PCB Connector Modular Full Plastic
( PHC )
Why Choose PengHui
Quality :
World’s Leader supplier of Integrated RJ45 Connector and PCB connector
Except the plating , From Design tooling , stamping , Injection molding , assemble ,
Testing , packing .All the step are doing by ourself . So we can control the quality .
Manufactured under strict controls |
RoHS compliance |
ISO 9001:2008 |
OEM for PULSE |
UL Certification |
Active Environmental policy |
Reach Cetitifaction |
Every module tested 3times (not just batch tested) |
Unit Price
Charge only 35% ~ 60% of Pulse , (Midcom), Bothhand Belfuse, Tyco, Halo,....Etc
All the step are doing by ourself. So we can control the cost
PHC have more than 30 units automation equipments to product as possible
PHC consists of 3 subordinations , located partly in Hunan ,Hubei ,Guangdong .
With large scale of production lines, we can reach to cost reduction at the most extent
Production&Testing
PHC have more than 30 units automation equipments to product as possible
PHC Every Magnetic RJ45 tested 3times (not just batch tested)
PHC Every SMT part used Automation testing and packing.
Service
PHC Offer good pre-sales & after-sales service &Strong technical support
1. New Project: Strong technical and ideal support your new design
2. Existing projects: Try to help customer to save the cost to offer the good quality product
and save time.
3. Free Samples:3-5 PCS of each part number.
4. Shipping Fee :We can get 80% off from DHL/UPS/TNT/FedEx, keeping safe and fast.
5. Customer complaint:24-48 hours reply 8D report.
6. Warranty : 24 months ( Merchandise are promised to be promptly returned, replacement,
or repair kits if customers are not satisfied)
Lead Time
With large Popularity of 450 Workers distributed in 4 subsidiary corporations, PHC can offer
the fastest
Lead time,and the particular case is according to the situation.
Case.1 |
Stock |
25% |
Case.2 |
3-4 Weeks |
70% |
Case.3 |
5-6 Weeks |
5% |
Design &Technical strength
We have many more than 20years experience in connector industry engineer can support
your new project. Design a new tooling time : 30-45 workdays
PHC Patented product in China
Wish To Be Your Best Supplier and Supporter In Your Lan connector Solutions
------------- PHC Sales & Support Team
Contact Person: admin