 |
|
Introduction
Double sided circuit board means has a double-sided copper, and metallized holes, that is double-sided copper, and copper are holes inside
Both sides have double wiring board, but to use the wire on both sides. Both sides must be in the room with appropriate electrical connections. "Bridge" between this circuit called vias. Guide hole in the PCB, metal filled or coated with holes, which can be connected to the conductors on both sides. Because dual-panel area twice as big than the single panel, double panel to solve the single-panel wiring staggered because of difficulty (can be turned to the other side of the hole), it is more suitable for use in more complex than single-panel circuit.
Advantages
Compared with single-board: wiring convenient, simple, labor-intensive wiring smaller, shorter line length.
Double Circuit Board Design Steps
1. Prepare circuit schematics
2. Create a new file and loaded PCB component package library
3, planning board
4, into the network table and components
5, automatic layout components
6, layout adjustment
7, the network density analysis
8, wiring rules set
9, automatic routing
10, manually adjust the wiring
Product Details:
Payment & Shipping Terms:
|
| Voltage: | AC 230V/110V | Cutting Speed: | 1 Cut/s |
|---|---|---|---|
| Cutting Thickness: | 0.2-3mm | Cutting Width: | 58mm-220mm |
| Maximum Cutting Length: | 300mm | ||
| High Light: | Laser PCB Depaneling,V Scoring Machine |
||
auto multi blade PCB separators for short LED aluminum board-YSV-2AL
Function and features:
1. With microcomputer technology, the program can control the cutting schedule and cutting times with storage of up to 100 groups of data. This machine is suitable for width from 58mm to 220mm of board.
2. The gap between the upper and lower blade is adjustable, from 0mm to 15mm.
3. The straight blade moves up and down, which is available to cut double-sided board.
4. The manual switch controls the cutting speed of 1 cut/s.
5. With safety device of Omron infrared light sensor, the machine stops operation when it senses the hand or foreign matter in the moving zone of the blade.
6. With step motor, the machine locks by itself and positioning accurately when in an energized state.
7. When the solder panel with many pieces of boards is separated, it’s easy to hurt the elements or the circuit. While this machine is available to avoid the damages and improve working efficiency and quality.
8. No need to feeding boards manually with high-tech device, there are reserved port for external robotic hand.
9. The productivity is visible due to the auto counter performance.
10. After cutting the pcb, the boards can be transferred directly to the inspection line through the conveyor belt.
11. The circular blade moves horizontally and the straight knife moves up and down
to cut the board with the pcb staying, thus the electronic elements won’t be damaged.
Specifications:
Voltage: AC 230V/110V
Cutting speed: 1 cut/s
Machine dimension: 1100×630×730mm
Cutting thickness: 0.2-3mm
Maximum cutting length: 300mm
Cutting width: 58mm-220mm
Contact Person: Miss. aaa
Tel: 86 755 8546321
Fax: 86-10-66557788-2345
