Introduction
Double sided circuit board means has a double-sided copper, and metallized holes, that is double-sided copper, and copper are holes inside
Both sides have double wiring board, but to use the wire on both sides. Both sides must be in the room with appropriate electrical connections. "Bridge" between this circuit called vias. Guide hole in the PCB, metal filled or coated with holes, which can be connected to the conductors on both sides. Because dual-panel area twice as big than the single panel, double panel to solve the single-panel wiring staggered because of difficulty (can be turned to the other side of the hole), it is more suitable for use in more complex than single-panel circuit.
Advantages
Compared with single-board: wiring convenient, simple, labor-intensive wiring smaller, shorter line length.
Double Circuit Board Design Steps
1. Prepare circuit schematics
2. Create a new file and loaded PCB component package library
3, planning board
4, into the network table and components
5, automatic layout components
6, layout adjustment
7, the network density analysis
8, wiring rules set
9, automatic routing
10, manually adjust the wiring
Product Details:
Payment & Shipping Terms:
|
High Light: | SMD LED PCB,led pcb boards |
---|
Custom Single / Double Layer Double Sided Pcb Design For Led Lights
Professional PCB Manufacturing
Base Material: Aluminum
Layer: 1 layer/2 layers
Board Thickness: 1.0mm/1.2mm/1.6mm
Board Dimension: 575x10mm,1175x10mm,1475x10mm(it can be customized)
Copper layer: 1oz/2oz/3oz
Solder Mask: White
Silkscreen: Black
Surface finish: LF HAL/HAL/OSP/Gold immersion/Silver plating
Outline Profile: CNC routing/V-Cut/Punching
All of the parameters can be customized!
Professional PCB Assembly:
Professional Surface-mounting and Through-hole soldering Technology.
Various sizes like 1206,0805,0603 components SMT technology.
ICT(In Circuit Test),FCT(Functional Circuit Test) technology.
PCB Assembly With UL,CE,FCC,Rohs Approval.
Nitrogen gas reflow soldering technology for SMT.
High Standard SMT&Solder Assembly Line.
High density interconnected board placement technology capacity.
Assemble pcb for you,plz click here
Our Quality Requirement:
We are now implementing international quality system includes: UL(E465880) ,TS16949 ,ISO14001, ISO9001
Quality target:
on-time delivery:≥98% ;
double layer board acceptability:≥97%
four-layer board acceptability:≥95%
six-layer board acceptability:≥92%
eight-layer board acceptability:≥88%
ten-layer board acceptability:≥85%
customer satisfaction :≥98%
complaint rate/rejected rate:≤ 1%
Our Environment Policy:
We committed to:
Comply with environmental regulations
Prevent any environmental accidents
Prevent pollution and reduce wastage
Minimize the consumption of resources
Education our employee in the awareness of the environmental protection
Set up environmental Management system and strengthen environment policy
RoHS compliance and Lead Free
Applications
It can be use 2835,5630,3014 LEDs
Special for 8W,10W,12W,16W,18W,22W,25W,30W,36W LED tube light
Lead Time
Samples: 3-4 days
Mass Production: 7-15 days(depend on the quantity)
Payment Terms
T/T,Western Union
Packing and Shipment
Vacuum package in carton
Factory Capability
Item |
Manufacturing Capability |
Surface Treatment |
OSP |
PCB Layer Type |
Single side,Double side |
Max. Working Panel Size |
1500mm*600mm |
Min. Working Panel Size |
4mm*4mm |
AL Substrate Thickness |
0.3mm-4mm |
Min. Conductor width |
0.15mm |
Min. Conductor spacing |
0.15mm |
Min. Drilling hole size |
0.2mm |
Plate Thickness Tolerance |
±0.1mm |
Finished Panel Tolerance |
±0.1mm |
V-CUT Alignment |
±0.1mm |
Hole Dia Tolerance |
±0.05mm |
Hole Position Tolerance |
±0.076mm |
Finished Copper Thickness |
35um-105um(1oz-6oz) |
Etching Under Cut |
>/=2.0 |
PTH&Panel Plating Uniformity |
>90% |
Eing/Flash Gold Thickness |
1-5u’’ |
Solder Mask Thickness |
15um-35um |
Min. Solder Mask Bridge |
0.076mm(3mil) |
Silk Screen |
White/Black(depend on your requirements) |
Thermal Conductivity |
1.0~20W/MK |
Withstand Voltage |
AC 2000V,DC 1500~4000V |
JHD PCB Company overview
JHD PCB in the professional lighting fair
Purchase Tips
a. If you want to purchase our PCB, you should provide a formal Gerber files or *.pcb file or something like that.
b. If you want to purchase by large quantity, please ask by SQM.
c. If you want to purchase the PCBA, you should provide the Gerber files, *.pcb file , BOM list etc.
d. If you want to reproduce some exsited PCB board for you, please first provide very clear pictures , then if you are satisfied with our estimate quotation, then send us the real thing, so we can clone it for you.
e. If none of the above can help you, please contact us directly by Skype, QQ or Email. We are very glad to answer the questions you ask, your satisfaction is our final destination.
JHD PCB would like to be your reliable partner in near future!
Contact Person: Miss. aaa
Tel: 86 755 8546321
Fax: 86-10-66557788-2345