Introduction
Double sided circuit board means has a double-sided copper, and metallized holes, that is double-sided copper, and copper are holes inside
Both sides have double wiring board, but to use the wire on both sides. Both sides must be in the room with appropriate electrical connections. "Bridge" between this circuit called vias. Guide hole in the PCB, metal filled or coated with holes, which can be connected to the conductors on both sides. Because dual-panel area twice as big than the single panel, double panel to solve the single-panel wiring staggered because of difficulty (can be turned to the other side of the hole), it is more suitable for use in more complex than single-panel circuit.
Advantages
Compared with single-board: wiring convenient, simple, labor-intensive wiring smaller, shorter line length.
Double Circuit Board Design Steps
1. Prepare circuit schematics
2. Create a new file and loaded PCB component package library
3, planning board
4, into the network table and components
5, automatic layout components
6, layout adjustment
7, the network density analysis
8, wiring rules set
9, automatic routing
10, manually adjust the wiring
Product Details:
Payment & Shipping Terms:
|
Material: | Steel, Copper | ||
---|---|---|---|
High Light: | spindle shaft,spindle stub shaft |
PCB Drilling / Routing 125000 rpm Spindle Shafts Westwind D1331-17
Quick Detail :
MODEL |
Name |
OEM |
Max Speed |
Application |
Machine |
D1331-17 |
SPINDLE SHAFT |
WESTWIND |
125,000 rpm |
PCB drilling |
Schmoll, Pluritec.etc. |
Description:
D1331-17 Westwind Spindle shafts Of PCB Air Bearing spindle
Spindle shaft with high precision, high quality, is using for D1331-17 spindle. The spindle is suitable for PCB drilling in the SCHMOLL, Pluritec ,etc. machines. 125,000rpm high speed optimizes the spindle performance, to produce high precision hole, or make sure the router edge is fine grade.
Shaft plays a KEY important role of a PCB spindle. It is important to make sure the surface is to specification (size and run out) or the following may result :
- Run out
- Vibration
- Fretting
- Noise
- Poor part finish
- Decreased bearing life
- Coupling damage
- Rotary Union Damage
Air bearing spindles are required a high precision, accuracy shaft to support, so that can be running in good condition for PCB CNC drilling. As a professional manufacturer, we put a lot of capital on the technical and inspection equipments, for achieving high precision requirements to make sure the spindle quality.
Friendly reminding, properly maintenance spindle and collet is good for prolong spindle using life, also good for each parts using life.
Specifications :
SHAFT FOR AIR BEARING SPINDLE |
||
MODEL |
SPEED (RPM) |
APPLICABLE TO |
M320-64C |
80K |
PCB drilling or routing |
ABW110 |
110K |
PCB drilling |
D1331 |
125K |
PCB drilling |
D1201-21 |
125K |
PCB drilling |
H501A(D1264-07) |
125K |
PCB drilling |
H512A(D1600-01) |
125K |
PCB drilling |
D1531-09 |
150K |
PCB drilling |
H516D(D1722-03) |
160K |
PCB drilling |
H916C |
160K |
PCB drilling |
D1686 |
180K |
PCB drilling |
D1780-01 |
180K |
PCB drilling |
H920B |
200K |
PCB drilling |
H920E1 |
200K |
PCB drilling |
D1822-09 |
200K |
PCB drilling |
More than above models can offered please contact us for details. |
Communication with Customers
Cus. : Hi, do you have D1331-17 shaft?
KLKJ : Yes, how many do you need?
Cus. : Two, possible?
KLKJ : Sure, I double check the stock and email you later.
Cus. : OK, do you have the spindle?
KLKJ : Sorry, no produce the spindle for this model any more, it is less demand now.
Cus. : OK. I also want other parts.
KLKJ : Great! Kindly please advise which parts?
Cus. : I check and email you.
KLKJ : Good. Bye.
Contact Person: Miss. aaa
Tel: 86 755 8546321
Fax: 86-10-66557788-2345