 |
|
Introduction
Double sided circuit board means has a double-sided copper, and metallized holes, that is double-sided copper, and copper are holes inside
Both sides have double wiring board, but to use the wire on both sides. Both sides must be in the room with appropriate electrical connections. "Bridge" between this circuit called vias. Guide hole in the PCB, metal filled or coated with holes, which can be connected to the conductors on both sides. Because dual-panel area twice as big than the single panel, double panel to solve the single-panel wiring staggered because of difficulty (can be turned to the other side of the hole), it is more suitable for use in more complex than single-panel circuit.
Advantages
Compared with single-board: wiring convenient, simple, labor-intensive wiring smaller, shorter line length.
Double Circuit Board Design Steps
1. Prepare circuit schematics
2. Create a new file and loaded PCB component package library
3, planning board
4, into the network table and components
5, automatic layout components
6, layout adjustment
7, the network density analysis
8, wiring rules set
9, automatic routing
10, manually adjust the wiring
Product Details:
Payment & Shipping Terms:
|
| High Light: | pcb circuit board,flexible circuit board |
||
|---|---|---|---|
Double Sided Multilayer Flexible Circuit Board Control Feel Smooth 0.05mm - 1.0mm
Quick Detail:
|
Name |
Multilayer CB |
Material |
Cu: 1 oz PI: 1 mil |
|
Color |
Transparent,red,yellow, green,blue.Pink.,purple |
Surface treatment |
pure-tin plating |
|
Minimum hole dimension |
0.3mm |
Chemical resistance |
Meet IPC standard: |
|
Minimum linear width |
0.08mm |
Minimum linear distance |
0.08mm |
Description:
1. Drilling:The minimum diameter 0.1mm
2. Hole metallization:Minimum aperture 0.2mm,Thickness / aperture ratio 4:1
3. Wire width: Minimum:Gold plate 0.10mm, Tin plate0.1mm
4. Wire spacing: Minimum:Gold plate 0.10mm, Tin plate0.1mm
5. Gold plate: nickel layer thickness:≧2.5μ,Gold layer thickness: 0.05-0.1μm or according to customer requirements
6. HASL: tin layer thickness:≧2.5-5μ
7. Paneling: Line-to-edge minimum distance: 0.15mm hole to edge minimum distance: 0.15mm smallest form tolerance: ± 0.1mm
8. Socket chamfer: Angle: 30 degrees, 45 degrees, 60 degrees Depth: 1-3mm
9. V Cut: Angle: 30 degrees, 35 degrees, 45 degrees Depth: thickness 2/3 Minimum size: 80mm * 80mm
Applications:
1. The mobile phone
Focuses on the flexible circuit board light weight and thin thickness. Can effectively save the volume of products, easy connection of the battery, microphone, and buttons and into one.
2. Computer and LCD screen
Use the one line configuration of flexible circuit boards, and thin thickness. The digital signal into the picture, through the LCD screen
3. CD player
Focuses on three dimensional assembly characteristics of flexible circuit boards and thin thickness. The huge CD to carry around
4. Disk drives
Regardless of the hard disk, or diskette, is very dependent on FPC high softness and thickness of the 0.1 mm slim, read data finish quickly. Either a PC or NOTEBOOK.
5. The latest applications
Hard disk drives (HDDS, hard disk drive) of suspended circuit (Su ensi. N cireuit) and the components of xe packaging board, etc
Competitive Advantage:
1.Beautiful appearance,rich and bright in color,design can be arbitrary,the products can fully reflect the
individual style of the product itself and designer.
2.Panel can wash, good protection of durable color,characters,logos and other panel contents without
injury.
3.Small size,light weight ,thin thickness, good tactility, abrasion resistant, installation and connection
convenience.
4.Tightness is good ,moisture-proof,dust-proof,waterproof,anti-oil,anti-corrosion and erosion of harmful gases proof,acid and alkali proof,quakeproof.
5.Low cost,high lifespan,membrane switch's design and manufacture are using the keyboard as a whole
way,whether on the material or mold charges,the costs are lowest,the life expectancy of different types of
membrane switch is more than 100million times.
Specifications
|
Type |
Multilayer CB |
Application |
Electronic Machine |
|
Color |
blue |
Feature |
Energy-efficient & Low power |
|
Machine Stiffness |
Rigid |
Lays
|
Customized |
|
Material |
PET /PC |
I nsulation Material |
Organic resin |
|
I nsulation layer thichness |
General |
Antiflaming Speciality |
VO |
|
Processing Technic |
Rolled foil |
Reinforcing material |
Glass fiber |
|
Insulating Resin |
Polyimide resin |
Export Markets |
Global |
Contact Person: Miss. aaa
Tel: 86 755 8546321
Fax: 86-10-66557788-2345
